1.5″ Seal-Tite™ Corner Seal Tape

$16.77

Seal-Tite Corner Seal is a heavy-duty material for sealing RV walls and ceilings. Applied before the molding, Corner Seal provides a durable, flexible virtually impermeable seal between the unfinished union of the walls and ceilings.
One 50ft roll of Corner Seal – Installation Instructions included.
For best value, order two rolls.
Product # : CS112B-1

Seal-Tite™ Corner Seal is a game changing production tape. The sealing side consists of a thick, pressure-sensitive elastomeric seal that sticks and conforms to any smooth or irregular surface, including S-locks. Corner Seal provides an instant and permanent seal underneath the caulk-and-molding system to provide a double barrier of leak protection.

The fleece side provides more superior caulk-cure adhesion than the typical smooth surface of RV exteriors. Additionally, Corner Seal fleece allows for easy molding repositioning during installation. If the fabricator needs to realign caulked molding before fastening, the fleece allows them to easily pull off the molding and reapply. As an added benefit, durable Corner Seal assists in holding the joined panels together during molding installation, helping to keep all materials aligned and flush.

Corner Seal Provides Better Leak Protection than Caulk-and-Molding Alone

When unfinished ceilings and walls join, large gaps can form between the unsealed edges. This is especially true when joining corrugated metal RV siding and metal S-Lock. Oftentimes the caulk in a caulk-and-molding system will not properly cover these gaps, or the leg of the molding does not extend far enough down the RV surface.

Double Layered Engineering

The high-tack adhesive with flexible elastomers provides a strong, flexible bond. Fleece allows for easy molding repositioning during install, then provides a permanent intermeshing bond.

Replacement parts are available for all Versa Liner® wheel simulator sets. To order parts, find the appropriate wheel set part number (from the chart below) for your motorhome. Then click on the Dicor part number to see the parts that are available in the shopping cart.

Ford

 
Set Number Vehicle Year &
Model
Wheel Description Wheel Manufacturer &
Wheel Numbers
V160F2 1992 to 1997 1/2 16˝ 8 lug, 8 hand hole Accuride 28618, 29317
V160F7 1997 1/2  to March 2007 16˝ 8 lug, 8 hand hole Accuride 28618, 29317, 29315
V160F0 1984-1/2 to 1998 16˝ 8 lug, 4 hand hole Accuride 28322, 28356
V160F8 1999 to 2002 16˝ 8 lug, 4 hand hole Accuride 29223
V160F8M 2003 to 2004 16˝ 8 lug, 4 hand hole Accuride 28348
V160SD 1988 through 1998, Super Duty 16˝ 10 lug, 4 hand hole Accuride 28375, 28513, 28671
V170F5 2005 to current, Super Duty 17˝ x 6.50˝ 8 lug, 4 hand hole Accuride 29837
V195F96 1999 through 2002, Super Duty 19.5˝ x 6.00˝
8 lug, 5 hand hole
Accuride 29186
V195F96M 2003 to 2004, Super Duty 19.5˝ x 6.00˝
8 lug, 5 hand hole
Accuride 29186
V195F66M 2006 to current, Super Duty 19.5˝ x 6.00˝
10 lug, 5 hand hole
Accuride 29883, 29884, 29839
V195F9 1999 through 2002, Super Duty 19.5˝ x 6.75˝
8 lug, 5 hand hole
Accuride 29236
V195F9M 2003 to 2004, Super Duty 19.5˝ x 6.75˝
8 lug, 5 hand hole
Accuride 29236
V195F6M 2006 to current, Super Duty 19.5˝ x 6.75˝
10 lug, 5 hand hole
Accuride 29875, 29879, 29736
V160F4 1984-1/2 to 1998, 4-Wheel Drive 16˝ 8 lug, 4 hand hole Accuride 28371, 28512, 29316
V22553 2006 to current 22.5˝ x 7.50˝
8 lug, 8 hand hole
Accuride 29028

 

Workhorse/Chevrolet/GMC

 
Dicor Part Number Vehicle Year
& Model
Wheel Description Wheel Manufacturer &
Wheel Numbers
V160G4 1973 through 2002
2WD & 4WD
16˝  & 16.5˝ 8 lug, 4 hand hole Accuride 28177, 28374, 28603
V195P5 1977 to 2005
P-30 chassis
19.5˝ 5 lug front & 10 lug rear, 5 hand hole Accuride 27775, Maxion W0002398
V195P7 1977 to current,
P-30 chassis
19.5″ 5 lug front
& 10 lug rear
w/jam nut only design
Accuride 27778
V19580 1996 to current 19.5˝ 8 lug,
4 hand hole
Accuride 28680, 28612, 28532
V19582 1998 to current, W22 chassis 19.5˝ x 6.75˝ 22mm studs, 8 lug, 4 hand hole Accuride 28680, Maxion W0002404
V22569 1999 to current, W22 chassis 22.5˝ x 6.75˝ 8 lug,
4 hand hole
Accuride 28869, Maxion W0002403
V22553 2007 to current, UFO chassis 22.5˝ x 7.50˝ 8 lug,
8 hand hole
Accuride 29028
V22587 1999 to current 22.5˝ x 8.25˝ 10 lug,
5 hand hole
Accuride 28487, Maxion W0003684

 

 

Freightliner/Oshkosh/
Spartan/John Deere
& Heavy Duty Wheels

 
Dicor Part Number Vehicle Year
& Model
Wheel Description Wheel Manufacturer &
Wheel Numbers
V150SF 2003 to 2005 15˝ 6 lug, 6 hand hole Daimler Benz 9044000002
V195JO 1979 to current (also Dodge M600) 19.5˝ 6 lug,
6 hand hole
Accuride 28179
V195OS 1992 to current 19.5˝ 6 lug,
2 hand hole
Accuride 28853
V22506 1992 to current 22.5˝ x 6.75˝ 6 lug,
6 hand hole
Accuride 28157
V22510-3/4 1992 to current 22.5˝ x 7.50˝ 10 lug, 2 hand hole,
3/4˝ front & 1-1/8″ rear lug
Accuride 27403
V22501 1997 to current 22.5˝ x 7.50˝
10 lug, 5 hand hole
Accuride 29001
V22587 1999 to current 22.5˝ x 8.25˝
10 lug, 5 hand hole
Accuride 28487 & Maxion W0003684

 

Versa Liner® Hub Covers
for Aluminum Wheels

 
Dicor Part Number Vehicle Year & Model Wheel Description
VAC10285 2003 to current
Freightliner & Workhorse rear diesel
22.5˝ 10 lug, 26mm high on 285mm bolt circle
VAC10285-30 2003 to current
Spartan rear diesel
22.5˝ 10 lug, 30mm high on 285mm bolt circle
VAC8275 2004 current
Ford F-53 chassis
22.5˝ 8 lug, 26mm high on 275mm bolt circle